Şenel M16-K1 Hydraulic Tapping

Table Drills General Features
- Heavy-duty cast iron construction, ergonomic design.
- The main shaft is precision ground.
- The spindle is induction, precision ground and rigidly bedded.
- The spindle is mounted on the pulley with a brooch system. Space, noise and run-out are minimal.
- The spring system is mounted outside the body, increasing its strength.
- After the whole bench body was cleaned with solvent and putty and sandpaper was applied, 1 coat of primer paint + 1 coat of industrial paint was applied.
- All components used are 1st quality.
- There is no spare part problem.
- The motor, switch, contactors and all electrical materials are CE certified.

  • Maximum Drilling Capacity mm 16
  • Kılavuz Çapı M12
  • Electric Motor kW 0,55
  • Motor Çıkış Devri d/dk 900
  • Spindle Speed rpm Yüksek - 450-4500 / Düşük - 280-2800
  • İş Mili Devir Kapasitesi 5
  • Boyutlar ( ExBxY ) mm 480x700x730
  • Weight kg 97
  • İş Mili Ucu - Tabla Arası Max-Min mm 400-145
  • İş Mili Strok mm 100
  • Spindle Conical 2MK-B16